EDR2RXD1 Refrigerator Water Filter 2
- NSF/ANSI 42 & 53 certified
- 200 gal / 6-month capacity
- Tool-free install in 2 min
- Fits 500+ refrigerator models
What's in the box
One replacement cartridge, install instructions, and a refill reminder magnet.
How to install (2 mins)
- Twist out your old filter (quarter-turn counter-clockwise).
- Slide the new cartridge into the same slot.
- Twist clockwise until it clicks.
- Run 2 gallons through to flush carbon dust.
Shipping & free returns
Free U.S. shipping on orders $100+. Ships same business day if ordered before 2pm ET. 30-day money-back guarantee — return for a full refund, no restocking fee.
Specs at a glance
- Capacity: 200 gallons / ~6 months
- Micron rating: 0.5 μm
- Flow rate: 0.78 GPM
- Operating pressure: 30–125 PSI
Why this filter
EDR2RXD1 Refrigerator Water Filter — Filter 2
The EDR2RXD1 is a genuine, NSF-certified replacement refrigerator water filter engineered for select Whirlpool, KitchenAid, Maytag, Amana, and JennAir refrigerators. Each cartridge is independently tested and certified to reduce up to 99% of lead along with other potentially harmful contaminants — giving you and your family fresh, great-tasting drinking water straight from the dispenser.
Key Benefits
- NSF/ANSI Certified Filtration: Reduces 99% of lead, plus chlorine taste & odor, mercury, asbestos, particulates, and select pharmaceuticals.
- Long-Lasting Performance: Replace every 6 months (or 200 gallons) for the freshest taste and best performance.
- Genuine OEM Replacement: Manufactured by Whirlpool Corporation. Replaces older part number(s) P9WB2L.
- Tool-Free Installation: Twist-in design swaps out in under 5 minutes — no tools required.
- Trusted Brand: Approved by Whirlpool, KitchenAid, Maytag, Amana and JennAir.
Compatibility
The EDR2RXD1 (Filter 2) is designed for select Whirlpool, KitchenAid, Maytag, Amana, and JennAir refrigerators. Look for the Orange Filter indicator or the code EDR2RXD1 / Filter 2 on your existing cartridge to confirm fitment. Also replaces the legacy part number(s) P9WB2L.
How to Replace Your Refrigerator Water Filter
- Locate the filter — usually in the upper-right interior of the refrigerator or behind the base grille.
- Twist the old filter counter-clockwise (about a quarter turn) and pull it straight out.
- Remove the protective cap from the new EDR2RXD1 filter.
- Insert and twist clockwise until it locks into place.
- Run 3–4 gallons of water through the dispenser to flush the new filter before drinking.
What is in the Box
- 1 × EDR2RXD1 Refrigerator Water Filter
- Installation instructions
Pro tip: Set a calendar reminder so you never miss a replacement — fresh filters mean fresh-tasting water.
Specifications
| Filter type | Activated carbon block + sediment pre-filter |
|---|---|
| Capacity | 200 gallons / ~6 months |
| Micron rating | 0.5 μm |
| Flow rate | 0.78 GPM |
| Certifications | NSF/ANSI 42, 53, 401 |
| Operating pressure | 30–125 PSI |
| Replacement | Tool-free twist-in |
Independently lab-tested per NSF/ANSI 53.
Chlorine, VOCs, pharmaceuticals, microplastics, and more.
Fits these models
Not sure if it fits? Search your appliance model number below.
Don't see your model? Chat with us — we'll confirm in seconds.